Sequentix P3 SEQUENCER Operation Manual page 41

If a track is muted when you select partial bank init, its pattern data will be left intact, although all
common part data will still be affected, so FTS settings may disappear and make it seem like some
patterns have changed.
To perform a partial bank init:
hold the FUNC key
•
press the "Bank Init" soft-key, F1.
•
The confirmation display will read:
Partial bank init must be confirmed in the same way as a full Bank Init, with F1 and F2.
F2 - Bank Program Change
The "BPgm" option allows you to set a program number to be sent in a MIDI program change message
when a bank is selected.
The message is sent on the "pgm" channel described in the previous section on assigning MIDI
channels.
This option is designed for use with multi-timbral synth modules where you are triggering different
sounds with a number of tracks on the P3, each on their own MIDI channel, but you need to recall
multi-timbral setup patches on the module using a separate global MIDI channel.
Pressing the "BPgm" soft-key, F2, enters this page:
Key Label Function
F1 save Store the new setting and return to play mode
F2 off Disable this setting
F3 lose Restore the previous setting and return to play mode
P3 Sequencer User Manual
Sequentix Music Systems
Page 41