The Accumulator Events - Sequentix P3 SEQUENCER Operation Manual

The Accumulator Events

For each of the three accumulators, there is an absolute and relative offset event:
offset note abs
offset note rel
offset velo abs
offset velo rel
offset aux D abs
offset aux D rel
There are another set of events which take no value, but simply prevent each accumulator from
affecting specific steps on which the event is set active.
The accumulators are not reset, and any offset events on the same step will still apply.
The accumulator defeat events are:
note acc defeat
velo acc defeat
auxD acc defeat
You may also want to dynamically modify the accumulator limits - overriding the values set for the
pattern. This can be done using these events:
set note acc lim
set velo acc lim
set auxD acc lim
The last two events in the group allow the aux D accumulator to be used to modify the length and
delay settings for each step.
add dAcc to leng
add dAcc to dlay
P3 Sequencer User Manual
set note accumulator value
add to note accumulator value
set velocity accumulator value
add to velocity accumulator value
set aux D accumulator value
add to aux D accumulator value
add aux D accumulator (scaled) to length
add aux D accumulator (scaled) to delay
Sequentix Music Systems
range: 0 to 127
range: 0 to 63 / -64 to -1
range: 0 to 127
range: 0 to 63 / -64 to -1
range: 0 to 127
range: 0 to 63 / -64 to -1
no value
no value
Page 146