Sequentix P3 SEQUENCER Operation Manual page 13

Sequentix Music Systems
Setting Note Values
Now let's change som e of the note values.
This is done using the lower row of 16 knobs, which are labelled NOTE:
Simply turn the note knob s above each step to edit the note on that step.
The note value will jump to the current knob position as soon as you move the knob, and will be
shown on the top line of the display, like this:
When you stop moving the knob, the display will return to normal after a second or so.
Now that you can choose which steps will play notes by setting gates, and select different notes with
the knobs, let's look at the upper row of knobs.
Setting Velocity Values
On entering pattern edit, the UPPER knobs are assigned to edit the MIDI velocity on each step.
As with the step keys, there are other values the upper knobs can be used to edit. These are selected
using the UPPER MODE button, with the chosen value shown by one of the four status LEDs below.
For now we'll just look at velocity .
As you turn the upper knobs, the top line of the display will again show the new values you are
setting, like this:
Go through your pattern, and set a different velocity value on each step. You should hear this having
an effect on your attached instrument as the pattern plays.
P3 Sequencer User Manual Page 13