Record - Sequentix P3 SEQUENCER Operation Manual

Record Page 2 –
The second record page looks like this:
Key Label Function
Toggles setting of tie where recorded notes overlap steps
F1 ties
F2 FTS Toggles Force-To-Scale of recorded notes
F3 Dub Selects special record modes
F1 – Ties
Soft-key F1 toggles the record ties option.
With the "ties" option enabled, when a recorded note is held over more than one pattern step, or if the
note overlaps the next note, the steps will have the tie setting turned on.
With "ties" off, holding a single note over multiple steps will record a repeating pattern of single notes
on every step, and overlapped notes will be recorded with a gap between them.
F2 - FTS
The "FTS" option selects whether notes being recorded into a pattern should be forced to the current
scale before they are written to the pattern.
Note that even if FTS is turned off, notes will still be FTS'd according to the current settings.
The difference is that they will be recorded into the pattern with their original note values.
P3 Sequencer User Manual
Sequentix Music Systems
Page 114