Lipo Battery Charging; Fpv-Camera Kit - Carson SPY HAWK Basic Instruction Manual

o. LiPo Battery Charging
Warning!
During charging, place the charger and battery on a non-flammable
surface and monitor until the charging process is completely finished.
Charging tip for version SPY HAWK FPV 500505022
GB
Connect the battery to the balance charger and wall charger. The two
LED lights are red whilst charging and turn green when charging is
finished. Then plug the flight battery to the charger using the white
plug (balancer connection).
The LEDs on the charger glow red. The battery is fully charged when
all LEDs glow green.
After charging has finished disconnect the battery from the charger
immediately..
Please ensure that you also observe the safety information on pages 34 and 35!
p. FPV-Camera Kit
Your SPY HAWK „FPV" (First Person View) is fitted with a 5 megapixel
video camera (1280 x 720). The video is streamed live to the remote
control via the 5.8 GHz transmitter built into the model. This gives the
pilot a first person view (FPV) on the screen.
52 CARSON Spy Hawk • 50 050 5019 + 20 + 21 + 22
Charging tip for versions:
SPY HAWK basic 50 050 5019
SPY HAWK Autopilot 50 050 5020
SPY HAWK Autopilot + Videorecord 50 050 5021
Connect the battery to the balance charger and wall charger. The two
LED lights are red whilst charging and turn green when charging is
finished. Then plug the flight battery to the charger using the white
plug (balancer connection).
The LEDs on the charger glow red. The battery is fully charged when
all LEDs glow green.
After charging has finished disconnect the battery from the charger
immediately..
Direct the aerial of the transmitter towards the model. Try to adjust
the FPV 5.8 GHz aerial so that it hangs down from the model as close
to a 90° angle as possible. This improves transmission and gives the
video signal a range of 300-400 m.