7
Connect the servo rod to the Rudder servo horn.
9
Connect another Aileron servo electrical wire (3CH exception).
11
Ensure the wings to be mounted properly.
8
Clip here
Connect Aileron servo electrical wire (3CH exception).
10
Connect two wings, ensure the bolt to be inserted into the
strengthening tube.
12
Install the propeller to the motor axis carefully, please check the
positive and negative on propeller
CARSON Spy Hawk • 50 050 5019 + 20 + 21 + 22
Reinforced link-tube only at
FPV-Version 500500022
37
GB