Battery Mounting - Carson SPY HAWK Basic Instruction Manual

2. Elevator sensivity set up – nor mode
(normal)
Hold down the ENT key for 1 second to enter setting status. Enter set
sensitive status by the up/down key. Press Elevator trim key (Eleva-
tor) to set the sensitivity and then hold the EXT key for 2 seconds to
confirm and exit.
GB
3. Aileron sensivity set up – nor mode
(normal)
Hold down the ENT key for 1 second to enter setting status. Enter set
sensitive status by the up/down key. Press the Aileron trim key to set
the sensitivity and then hold the EXT key for 2 seconds to confirm and
exit.
m. Battery Mounting
Attention:
• Do not mix old and new batteries/rechargeable batteries.
• Do not mix different types of batteries.
• Do not charge non-rechargeable batteries.
1
Open the cover.
4
Return the battery box back to
the compartment.
50 CARSON Spy Hawk • 50 050 5019 + 20 + 21 + 22
5805
Set reverse
Set sensitive
Elevator
Aileron
Rudder
Plane type
Expert mode
Stick mode
5805
Set reverse
Set sensitive
Elevator
Aileron
Rudder
Plane type
Expert mode
Stick mode
2
Take out the battery box.
5
Fasten the screw..
HUBSAN 7.7V
X
-
40
50
50
Helicopter
No
Mode 2
HUBSAN 7.7V
X
-
40
50
50
Helicopter
No
Mode 2
3
According to the correct polarities, install
8 x AAA batteries.
6
Ready!