Charging The Battery; Insert Battery Pack - Carson Speed Shark Brushless Instruction Manual

CHARGING THE BATTERY

CAUTION!
Only charge the lithium battery pack using the charger
supplied.
Charging procedure (Brushed Version 500108026)
1 Plug charger into socket. (Power LEDs (3) illuminate in green)
2 Connect battery pack to charger. (Status LEDs (2x) illuminate
in red)
3 Battery pack is fully charged when the status LEDs change
colour to green.
Charging procedure (Brushless Version 500108027)
1 Plug charger into socket.
(Power LED illuminates in green)
2 Connect battery pack to charger. (Status LED glows red)
3 Battery pack is fully charged when the status LED changes
colour to green.
CAUTION! Status LED flashes in red: Battery pack defective or
cell with low voltage

INSERT BATTERY PACK

Turn the catch anticlockwise and open the boat cover.
Connect the battery pack to the drive controller connection in the
boat.
1
Place the battery pack in the provided holder.
3
Now replace the cover and close the catch again.
2
4
21 // GB