Motocaddy M1 PRO Instruction Manual page 19

2) If your trolley will not move please run through the following:
Please plug the
battery into the
trolley.
Is the right LED
on the handle lit?
Please press the Is the left LED
Yes
on the handle lit?
on/off button.
Is the No. 1 light
No
on the controller
box lit?
The fuse may have blown in your
battery cable, please check this first.
If the fuse has not blown then the
No
battery is either faulty or one of the
connections is loose. Unzip the battery
bag to check the connections.
Is the No. 2 light
Yes
on the controller
box lit?
Yes
The button is
faulty. Please
replace this part
Remove the plastic
button and press the
No
on/off switch without
this fitted, does this
The On/Off
change the outcome?
switch is faulty.
Please replace
this part
No
Yes
Troubleshooting
Is the No. 3 light
Yes
on the controller
box lit?
No
Yes
The control
The motor is
box is
faulty. Please
faulty. Please
replace this part.
replace this part.
No
The LED board inside
the handle is faulty.
Please replace this part.
Page 17