Preface; Ip Router Configuration - Alcatel-Lucent 7210 SAS M Configuration Manual

About This Guide
This guide describes logical IP routing interfaces, IP and MAC-based filtering support provided by
the 7210 SAS M, X and presents configuration and implementation examples.
All the variants of 7210 SAS-M can be configured in two modes, that is in network mode and in
access-uplink mode. In network mode configuration 7210 SAS-M uses IP/MPLS to provide
service transport. In access-uplink mode configuration 7210 SAS-M uses Ethernet QinQ
technology to provide service transport. The mode can be selected by configuring the BOF
appropriately.
Note: In either mode, it is expected that the user will only configure the required CLI parameters
appropriate for the mode he intends to use. Unless otherwise noted, most of the configuration is
similar in both the Network mode and Access uplink mode.
Note :Only 7210 SAS-M supports access-uplink mode. 7210 SAS-X does not support access-
uplink mode.
This document is organized into functional chapters and provides concepts and descriptions of the
implementation flow, as well as Command Line Interface (CLI) syntax and command usage.
Audience
This manual is intended for network administrators who are responsible for configuring the 7210
SAS-Series routers. It is assumed that the network administrators have an understanding of
networking principles and configurations. Protocols, standards, and services described in this
manual include the following:
•
•
7210 SAS M, X Router Configuration Guide

IP router configuration

IP and MAC-based filters

Preface

Page 9