Getting Started; Alcatel-Lucent 7210 Sas-Series Router Configuration Process; Table 1: Configuration Process - Alcatel-Lucent 7210 SAS M Configuration Manual

In This Chapter
This chapter provides process flow information to configure routing entities, virtual routers, IP and
MAC filters.
Alcatel-Lucent 7210 SAS-Series Router Configuration Pro-
cess
Table 1
MAC-based filtering.
This guide is presented in an overall logical configuration flow. Each section describes a software
area and provides CLI syntax and command usage to configure parameters for a functional area.

Table 1: Configuration Process

Area
Router configuration
Reference
7210 SAS M, X Router Configuration Guide
lists the tasks necessary to configure logical IP routing interfaces, virtual routers, IP and
Task
Configure router parameters,
including router interfaces, addresses,
router IDs, and autonomous systems.
IP and MAC filters
List of IEEE, IETF, and other
proprietary entities.

Getting Started

Chapter
IP Router Configuration on page 15
Filter Policies on page 87
Standards and Protocol Support on page 163
Page 13