Table of Contents
Advertisement
2.3. Technical Specifications
Each Thinklogical
Camera Fiber-Link System is designed to the following specifications:
®
Electrical Cable
(supplied with
system)
Serial
Protocol
Indicators
Optical Cable
Camera Fiber-Link Extender Manual
CFL-3000: (1) CBL000007-002MR MDR-26 male cable, 2 meters
(1) KIT-000013 CAMERALINK W/RJ45 adapter/cable kit
CFL-4000: (2) CBL000007-002MR MDR-26 male CABLE, 2 meters
(1) KIT-000013 CAMERALINK W/RJ45 adapter/cable kit
CFL-5000: (2) CBL000007-002MR MDR-26 male CABLE, 2 meters
(1) KIT-000013 CAMERALINK W/RJ45 adapter/cable kit
CFL-6000: (2) CBL000007-002MR MDR-26 male CABLE, 2 meters
(1) KIT-000013 CAMERALINK W/RJ45 adapter/cable kit
KIT-000013 contains the following:
(1) ADP-000007 DB9M TO RJ45F Adapter
(1) ADP-000008 DB9F TO RJ45F Adapter
(2) CBL000001-002MR CAT5 cable assembly, 2 meters
For Adapter Pin-outs, see Appendix B, pg. 32.
RJ45 (DB9M to RJ45 and DB9F to RJ45 adapters included)
Camera Link compliant (supports base/medium/full configurations)
Two LEDs on each Camera Fiber-Link module:
Loss of Signal [LOS]
Power
(Green ON
Fiber Count:
CFL-3000 (Base): 2
CFL-4000 (Full/Medium/Base): 3
CFL-5000 (Dual Base): 3
CFL-6000 (Dual Base RX): 4
Fiber Type: Multi-mode, 50/125um or 62.5/125um SC-type connectors
Fiber Connector Type: SC Standard / ST or LC Optional
Maximum Fiber Distance: See Appendix C, pg. 33
(Fiber Cable is either customer-supplied or ordered from Thinklogical)
Extend
(Red ON
if no signal)
(Red BLINKS
if no camera is connected)
(Red OFF
for good connection)
when power is applied)
10
Distribute
Innovate
Rev. E, June 2012
®
Advertisement
Table of Contents
