Connecting Cables To The Monitor - Fujitsu Siemens Computers SCENICVIEW B17-5 Operating Manual

Getting started

Connecting cables to the monitor

The monitor ports are protected by a cover.
The supplied data cables have two 15-pin D-SUB connectors or two 24-pin DVI
connectors for connection to the monitor and to the computer.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
► Remove the cover (2).
► Select the appropriate data cable for your computer.
1
1 = Mains socket
2 = Security slot for the "Kensington Lock"
3 = D-SUB socket (ANALOG)
► Connect one of the connectors of the data cable to the D-SUB connector (3) or the DVI-D
connector (4) on the monitor and secure the plug-in connection by tightening the retaining screws.
► Insert one connector of the audio cable in the AUDIO IN (5) socket on the
monitor and make sure it is properly engaged.
► Connect the supplied mains cable into the power socket (1) of the monitor.
A lock (Kensington Lock) can be mounted in the security slot to protect the monitor
against theft. A Kensington lock is not supplied with the monitor.
12
2
4 5 3
4 = AUDIO-IN socket
5 = DVI-D connector (DIGITAL)
A26361-K1255-Z120-1-7619, edition 1