Changing The Monitor Settings With The Buttons Of The Control Panel - Fujitsu Siemens Computers SCENICVIEW B17-5 Operating Manual

Operation
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. With the OSD menu not
activated, you can make the following settings directly:
SELECT/ MENU
1 = Buttons for the OSD menu (On-Screen
Display)
2 = Power indicator
Performing auto-adjustment of the monitor
► Press the EXIT / AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting the input signal (D-SUB/DVI_D)
► Press the Back /
► Press the Forward / Mute button or the Back /
monitor connection (analog D-SUB or digital DVI-D).
This setting window can also be called when the OSD menu is locked.
Activating/deactivating muting
► Press the Mute button to switch the sound off and on again.
The Action was executed message appears.
16
1
button for about 1 second.
INPUT button to open the Input select setting window.
EXIT / AUTO
INPUT
3 = ON/OFF switch
button to select the desired
INPUT
A26361-K1255-Z120-1-7619, edition 1
2 3