Connecting Cables To The Monitor - Fujitsu Siemens Computers 461V FA Operating Manual

Connecting cables to the monitor

The monitor ports are protected by a cover.
1
1 = Cover lever
2 = Power-adapter connection socket (DC 18V)
3 = D-SUB connector
Ê
Press the cover levers (1) upwards and remove the cover.
The data cable supplied has two 15-pin D-SUB connectors for the D-SUB connector of the monitor
and of the computer.
Ê
Connect one of the D-SUB connectors of the data cable to the D-SUB connector on the
monitor (3) and secure the plug-in connection by tightening the safety screws.
If instead of the data cable supplied you want to use a data cable with DVI-D connector or
i
if you want to connect the monitor to a second computer, proceed as follows:
Ê
Connect the DVI-D connector of the data cable to the DVI-D connector on the
monitor (4) and secure the plug-in connection by tightening the safety screws.
Data cables with DVI-D connectors are available from specialised dealers.
After switching on the monitor you must select the desired input with the OSD menu (see
chapter "Monitor settings using the OSD
Your monitor's power adapter is integrated in the monitor base. The power adapter cable is
permanently connected to the power adapter.
Ê
Connect the connector of the power adapter cable to the power adapter connector (2) of the
monitor and ensure a secure connection.
Ê
Connect the connector of the power cable supplied to the power connector (5) of the monitor
and ensure a secure connection.
Ê
Mount the cover over the connections again.
A26361-K708-Z100-2-5E19
2
4 = DVI-D connector
5 = Power connector
menu").
Color monitor 461V FA
3 4
English - 9
5