Connecting The Monitor; Connecting Cables To The Monitor - Fujitsu Siemens Computers FGSW-1602 User Manual

Connecting the monitor

Please take note of the safety information in the "Important notes" chapter.
!
CE conformance and optimum picture quality are guaranteed only if you use the data
cables supplied.
Do not cover the ventilation openings of the monitor.
The computer power plug must be pulled out!
► Be sure that the monitor and the computer are switched off.

Connecting cables to the monitor

The data cables provided have a plug for the DVI connection socket on the monitor and a D-SUB
plug or a DVI plug for the connection on the computer.
Select the suitable data cable for your computer.
Digital graphics card with DVI interface:
Graphics card with VGA interface:
Information on the computer connections and interfaces is contained in the operating manual for your
computer.
► Connect the angled connector of the data cable to the DVI connector on the monitor (2) and
secure the plug-in connection by tightening the safety screws.
► Plug the power adapter cable into the power connector (1) of the monitor.
A26361-K1018-Z120-1-7619, edition 1
1 2 3 4 6
5
SCALEOVIEW S17-2 / S19-2
1 = Connector for the power supply
2 = DVI connector (DIGITAL)
3 = AUDIO-IN connector
4 = AUDIO-IN connector
5 = Push-buttons to remove the loudspeaker
module
6 = Security slot for "Kensington Lock"
DVI connector
D-SUB connector
11