Connecting Cables To The Monitor - Fujitsu Siemens Computers C384FA-M Operating Manual

Colour monitor C384FA-M

Connecting cables to the monitor

The monitor ports are protected by a cover.
Ê
Remove the rear monitor cover (1).
Ê
Remove the upper cover of the monitor base (2).
1 = D-SUB connector
2 = AUDIO IN socket
The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the
computer.
Ê
Connect one of the connectors of the data cable to the D-SUB connector on the monitor (1)
and secure the plug-in connection by tightening the safety screws.
Ê
Insert the audio cable plug in the AUDIO IN socket (2) of the monitor.
8 - English
1
DC-IN 12V
3 = Socket for power supply
2
3
A26361-K826-Z100-2-5E19