SCENICVIEW A17-3A/A19-3A
Connecting cables to the monitor
The monitor ports are protected by a cover.
►
Remove the cover.
The data cables supplied have two 15-pin D-SUB connectors / two 24-pin DVI connectors for
connection to the monitor and to the computer.
►
Select the suitable data cable for your computer.
Digital graphics card with DVI interface:
Graphics card with VGA interface:
Information on the computer connections and interfaces is contained in the operating manual
for your computer.
►
Connect one of the connectors of the data cable to the D-SUB connector (3) or the DVI-D
connector (2) on the monitor and secure the plug-in connection by tightening the safety screws.
The monitor automatically detects the input when only one signal source is connected.
i
►
Insert one plug of the audio line in the AUDIO IN (5) socket on the monitor and make sure it is
properly engaged.
►
Plug the power cable supplied into the power connector (1) of the monitor.
A lock (Kensington Lock) can be mounted in the security slot (4) to protect the monitor
i
from theft. A Kensington Lock is not included in the consignment of the monitor.
12
1 =
Power connector
2 =
DVI-D connection socket (DIGITAL)
3 =
D-SUB connection socket (ANALOG)
4 =
Security slot for "Kensington Lock"
5 =
AUDIO-IN connector
6 =
Holes for fixing swivel arm or wall bracket
DVI connector
D-SUB connector
A26361-K1159-Z120-1-7619, edition 1