Adjusting The Height; Adjusting The Inclination; Adjusting The Rotation - Fujitsu Siemens Computers SCENICVIEW B17-5 Operating Manual

0
60
2
Depending on the situation, it may be advisable to use a swivel arm or wall
bracket (VESA FPMPMI), which are available from specialist dealers. For
this purpose the monitor base must be removed beforehand as described
in Chapter

Adjusting the height

The height of the monitor can be adjusted by approximately 120 mm.
► Grasp the monitor with both hands on the right and left edge of the casing
and move it upward or downward.

Adjusting the inclination

► Hold the monitor with both hands on the left and right sides of the casing
and move it to the desired angle.

Adjusting the rotation

The monitor can be horizontally rotated by ± 45° from its centre position.
► Grasp the monitor with both hands on the right and left edge of the casing
and turn it to the desired position.
A26361-K1255-Z120-1-7619, edition 1
1
50 cm
1
65
65
2
"Removing monitor base", Page
► Position the monitor so that the eye distance
to the screen (1) is around 50 cm.
► Position the monitor for optimum viewing
(1). The monitor should under no
circumstances fall outside the permissible
viewing space (2).
30
30
10.
Getting started
9