Configuring Tracvision L3/S3 For Remote Satellite Dish Operation - KVH Industries TracVision L3 Owner's Manual

A Guide to TracVision L3/S3
Remote Dish Wiring Configuration
2-26
2.8
In some campground locations, dense foliage will block the
satellite signal. In these situations, a remote portable antenna
may be the only solution to satellite signal reception.
The wiring option for the remote dish is very simple and should
be installed when the TracVision L3/S3 is installed. A high-
quality "A/B switch" should be used to change from
TracVision L3/S3 dish reception to remote antenna operation.
The recommended wiring arrangement for remote dish operation
is illustrated in Figure 2-21.
Figure 2-21
RF Cable
Configuring TracVision L3/S3 for
Remote Satellite Dish Operation
TV Out
IRD
SAT In
Common
A B
A/B Switch
A B
Antenna
RF Cable
RF Cable
Remote Dish