A Guide to TracVision L3/S3
Manual Positioning Commands
E-2
Calibrate Gyro (TracVision L3 only)
Function:
Command:
Argument:
Response:
Find Skew Angle for Currently Selected Satellite
Function:
Command:
Argument:
Response:
* Before this command can function properly, you must perform the GPS
Position command detailed in
latitude and longitude.
Help on Parser Commands
Function:
Command:
Argument:
Response:
E.2
To execute the following commands, first put the antenna unit in
idle mode by typing HALT and pressing "ENTER." Positioning
commands may be entered after the antenna comes to rest.
Azimuth Angle
Table E-2
Function:
Command:
Argument:
Response:
performs azimuth and elevation calibration
CALGYRO
none
echoes command and calibrates gyro
calculates necessary LNB skew based on latitude,
longitude, and selected satellite
SKEWANGLE*
none
displays skew angle
Section E.6
lists parser commands
HELP
none
prints a list of all parser commands
Manual Positioning Commands
commands a manual azimuth angle that the
mechanism moves to
AZ,xxxx (range is 0000 - 3599)
desired azimuth angle of the mechanism relative to
external magnetic reference, or baseplate fwd,
000° - 359.9°
echoes the command; mechanism moves at a
fixed velocity
to provide the system with the proper