KVH Industries TracVision G4 Technical Manual page 65

TracVision G4 Technical Manual
Figure 3-3
TracVision G4 Startup Screens
62
TracVision Startup and Self-test Screens
When configured as a component of a TracVision system,
GyroTrac conducts a series of startup routines and self-tests to
verify antenna operation. The TracVision self-test status screens
are only displayed when the main data display is set to show the
antenna status information (as described in Section 3.3, "Setup
Display Mode" on page 67.
Antenna initializing
Waiting for POS data
Init RF Controller
Waiting for POS data
Initial Ext Sensor
Waiting for POS data
Initial Antenna
###.#° ##.#° ####
Initial Rate Bias
###.#° ##.#° ####
** Search mode 1 **
###.#° ##.#° ####
** Search mode 2 **
###.#° ##.#° ####
** Search mode 3 **
###.#° ##.#° ####
Antenna is Tracking
###.#° ##.#° ####
Network ID Check
###.#° ##.#° ####
Tracking <SATNAME>
###.#° ##.#° ####
o Main Data Display
54-0147