KVH Industries TracVision G4 Technical Manual page 107

TracVision G4 Technical Manual
Figure 5-4
Main PCB Mounting (Top View)
108
6. Remove the nine #6-32 screws that secure the PCB
to the antenna frame (see Figure 5-4).
Main PCB
7. Remove the PCB from the antenna frame.
8. Reverse this process to install the replacement
PCB. Reconnect all connectors removed in Step 5.
9. Reinstall the PCB cover.
10. Apply power to the antenna unit.
11. Type HALT<cr> (<cr> indicates a carriage return/
ENTER key).
12. Type DEBUGON<cr> .
13. Type =TVG4<cr> .
14. Type =SERNUM,<serial number><cr> , where
<serial number> = the system serial number you
recorded in Step 2.
15. Type ZAP<cr> to restart/reinitialize the system.
16. Calibrate the antenna gyro as explained in
"Calibrating the Antenna Gyro" on page 112.
17. Reinstall your selected satellites as directed in
Section 2.9, "Installing Satellites Using the ADCU" on
page 44.
Support Frame
54-0147