KVH Industries TracVision G4 Technical Manual page 151

TracVision G4 Technical Manual
Installation Commands
160
H.7 Installation Commands
Table H-7 Set/Report GPS Position
Function:
Command:
Response:
Where:
Report Satellite Names
Function:
Command:
Response:
Report Tracked Satellite
Function:
Command:
Response:
Report Configured Satellite Names
Function:
Command:
Response:
Report Valid Satellite B Selections
Function:
Command:
Response:
Install Satellite Pair
Function:
Command:
Response:
reports or sets default GPS position
GPS<cr>
GPS,XX,D,YYY,E
GPS = XXD YYYE
GPS: XXD YYYE
XX = latitude (0-90)
D = S (South) or N (North)
YYY = longitude (0-180)
E = E (East) or W (West)
reports names for satellites A and B
SATINSTALL
SATINSTALL,<sat_a_name>,<sat_b_name>
reports name of satellite currently being tracked
SAT
SAT = <sat_name>
reports names for all configured satellites
SATLISTA
SATLISTA,<sat_name1>,...,<sat_nameX>
reports names for all valid Satellite B selections for
a given Satellite A selection
SATLISTB,<sat_a_name>
SATLISTB,<sat_a_name>,<sat_b_name1>
...,<sat_b_nameX>
installs satellites A and B as the satellite pair
SATINSTALL,<sat_a_name>,<sat_b_name>
If valid pair, echoes the input data
If invalid pair, returns error message
54-0147