FabiaTech FX5634 Fanless Series User Manual page 47

FabiaTech Corporation
Available options: On, Off
Default setting: On
PS/2 Mouse Support
The PS/2 mouse function is optional. Before you configure this field, make sure your
FX5632 supports this feature. The setting of Enabled allows the system to detect a
PS/2 mouse on boot up. If detected, IRQ12 will be used for the PS/2 mouse. IRQ 12
will be reserved for expansion cards if a PS/2 mouse is not detected. Disabled will
reserve IRQ12 for expansion cards and therefore the PS/2 mouse will not function.
Available options: Disabled, Enabled and Auto
Default setting: Auto
Wait for 'F1' If Error
AMIBIOS POST error messages are followed by:
Press <F1> to continue
If this field is set to Disabled, the AMIBIOS does not wait for you to press the <F1> key
after an error message.
Available options: Disabled, Enabled
Default setting: Disabled
Hit 'DEL' Message Display
Set this field to Disabled to prevent the message as follows:
Hit 'DEL' if you want to run setup
It will prevent the message from appearing on the first BIOS screen when the
computer boots.
Available options: Disabled, Enabled
Default setting: Enabled
41