Table of Contents
Advertisement
FabiaTech Corporation
IDE Configuration
You can use this screen to select options for the IDE Configuration Settings. Use the
up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option. A description of the selected item
appears on the right side of the screen. The settings are described on the following
pages. An example of the IDE Configuration screen is shown below.
OnBoard PCI IDE Controller
This item specifies the IDE channels used by the onboard PCI IDE controller
Available Options: Primary, Both and Disable
Default setting: Primary
IDE Primary/Third/ Fourth Master/Slave
IDE hard drive controllers can support up to two separate hard drives. These drives
have a master/slave relationship, which is determined by the cabling configuration
used to attach them to the controller.
LBA/Large Mode
LBA (Logical Block Addressing) is a method of addressing data on a disk drive. In
LBA mode, the maximum drive capacity is 137 GB. The Optimal and Fail-Safe
default setting is Auto
28
Advertisement
Table of Contents
