Keyboard Convention - FabiaTech FX5634 Fanless Series User Manual

FabiaTech Corporation
North Bridge Configuration
South Bridge Configuration
AMD 690E Configuration
Onboard Peripherals Configuration
7. Power
8. Exit
Save Changes and Exit: Exit system setup after saving the changes.F10
key can be used for this operation.
Discard Changes and Exit: Exit system setup without saving any changes.
ESC key can be used for this operation.
Discard Changes: Discard changes down so far any of the set questions.
F7 key can be used this operation.
Load Optimized Default: to auto configure the system according to
optimal setting with pre-defined values. This is also the factory default
setting of the system when you receive the board.
Load Fail-Safe Default: to configure the system in fail-safe mode with
predefined values.

Keyboard Convention

On the BIOS, the following keys can be used to operate and manage the menu:
Item
ESC
Page Up/Page Down
F1
F8
F9
F10
UP/Down Arrow Keys
Function
To exit the current menu or message
To select a parameter
To display the help menu if you do not know the
purpose or function of the item you are going to
configure
Fail-Safe Default
Optimized Default
Save and exit
To go upward or downward to the desired item
25