Download
Share
Print this page
VADDIO Wallview CCU HD-20 HD-SD Installation And User Manual
  1. Manuals
  2. Brands
  3. VADDIO Manuals
  4. Security Camera
  5. Wallview CCU HD-20 HD-SD
  6. Installation and user manual

VADDIO Wallview CCU HD-20 HD-SD Installation And User Manual

Vaddio high definition ptz camera featuring the quick-connect ccu interface and the ezim hd-sdi slot card
Hide thumbs Also See for Wallview CCU HD-20 HD-SD:

Advertisement

Quick Links

Download this manual
Installation and User Guide
V
™
W
V
I
E
W
™
C
C
U
H
D
-
2
0
H
D
-
S
D
I
V
™
W
V
I
E
W
™
C
C
U
H
D
-
2
0
H
D
-
S
D
I
A
D
D
I
O
A
L
L
A
D
D
I
O
A
L
L
High Definition PTZ Camera Featuring the Quick-Connect™ CCU Interface and the EZIM
HD-SDI Slot Card
Model Number 999-6958-000 (North America)
Model Number 999-6958-001 (International)
EZIM HD-SDI Slot Card for HD-20
Quick-Connect CCU for HD-18 / HD-20
©2011 Vaddio - All Rights Reserved ● WallVIEW CCU HD-20 HD-SDI ● Document Number 324-0182 Rev. A

Advertisement

loading
Need help?

Need help?

Do you have a question about the Wallview CCU HD-20 HD-SD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for VADDIO Wallview CCU HD-20 HD-SD

Summary of Contents for VADDIO Wallview CCU HD-20 HD-SD

  • Page 1 HD-SDI Slot Card Model Number 999-6958-000 (North America) Model Number 999-6958-001 (International) EZIM HD-SDI Slot Card for HD-20 Quick-Connect CCU for HD-18 / HD-20 ©2011 Vaddio - All Rights Reserved ● WallVIEW CCU HD-20 HD-SDI ● Document Number 324-0182 Rev. A...
  • Page 2 WallVIEW CCU HD-20 HD-SDI Inside Front Cover - Blank WallVIEW CCU HD-20 HD-SDI Manual 342-0182 Rev. A Page 2 of 24...
  • Page 3 Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
  • Page 4 IR sensors are built into the front of the ClearVIEW HD-20 to receive IR signals from the IR remote control supplied with the camera. 4) Blue Power Light: A Vaddio blue power light is illuminated when the camera is turned on. Compatible Vaddio Switchers and Joystick Controllers: Precision Camera Controller ProductionVIEW™...

  • Page 5: Important Safeguard

    WallVIEW CCU HD-20 HD-SDI ClearVIEW HD-20 PTZ Camera, Rear View with Feature Call-outs: ⑤ ⑨ ⑥ ⑩ ⑦ ⑪ ⑧ ⑫ 5) RS-232 IN & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices.
  • Page 6 WallVIEW CCU HD-20 HD-SDI Quick-Connect CCU Front Panel Controls (left to right): Tally Light: The blue LED tally light on the front panel is tied to the tally contacts on the rear panel allowing the user to easily track which camera interface is being used in a multi-camera system by supplying a simple contact closure. LCD Display: Backlit (blue) display indicates which parameter (iris, detail, etc.) is being adjusted.
  • Page 7 Tally on 2-pin Phoenix-type Connector: Contact closure lights a Vaddio blue LED on front panel allowing indication of which CCU/camera combination is active in a multi-camera/CCU installation. A tally command will also be sent to the HD-20 camera to illuminate the red LED on the camera’s base.
  • Page 8 Using only the most advanced and leading edge components available today, the EZIM HD-SDI Slot Card paired with the HD-20 PTZ camera produces remarkable picture quality. Anatomy of the Vaddio EZIM HD-SDI Slot Card: 1) Two (2) HD-SDI/SDI Outputs on BNC a.
  • Page 9 WallVIEW CCU HD-20 HD-SDI Installing the EZIM HD-SDI Slot Card: • The Slot Card will be packed separately. install the EZIM HD-SDI Slot Card, remove all and be certain that the HD- power connections 20 camera is not powered up before attempting to install the EZIM HD-SDI Slot Card.
  • Page 10 The IR output is sent out on the RS-232 RJ-45 jack on the back of the camera. Turning on the IR output will allow IR signals to be transmitted over the Cat-5e cable to the head end. When using RS-232 control or Vaddio CCU controllers (also via RS-232), turn the IR OUT to OFF.
  • Page 11 For RS-232, use a standard straight through Cat-5e cables (568B termination) from the RS-232 port on the back of a Vaddio camera controller or switcher to the camera. If the camera is connected to a third-party control system (such as AMX or Crestron), a DB-9 to RJ-45 control adapter cable is supplied.
  • Page 12 RS-232 IN Jack RS-232 HD-SDI HD-SDI Program HD-SDI Preview Monitors (No zoo inhabitants or zoo janitors were harmed in the making of the simulated video) Vaddio ProductionVIEW HD-SDI Console WallVIEW CCU HD-20 HD-SDI Manual 342-0182 Rev. A Page 12 of 24...
  • Page 13 Step 4: Connect the Vaddio 36 VDC, 2.78A power supply to the Quick-Connect CCU and then the AC side into an AC outlet. Power will travel down the Power Cat-5e cable to the camera. The camera will “Home” to a centered position ready for control information from CCU and the camera controller (ProductionVIEW HD or maybe the Precision Camera Controller).
  • Page 14 General Specifications: WallVIEW CCU HD-20 HD-SDI WallVIEW CCU HD-20: 999-6957-000 (North America) Part Numbers WallVIEW CCU HD-20: 999-6957-001 (International) Vaddio ClearVIEW HD-20 6.49mm diagonal (1/2.8 Type) Exmor High-speed CMOS Image Sensor Image Device 3.27M pixels (Effective) Picture Elements 1080/60i, 1080/50i, 720/60p, 720/50p, 1080/30p and 1080/25p (SD Resolutions Not Supported) HD Resolutions 20x Optical Zoom, 11-Element HiLD™...
  • Page 15 Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.
  • Page 16 Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.
  • Page 17 Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by Vaddio can affect emission compliance and could void the user’s authority to operate this equipment.

  • Page 18: Warranty Information

    Vaddio Customer Service: Vaddio will test, repair, or replace the product or products without charge if the unit is under warranty and is found to be defective. If the product is out of warranty, Vaddio will test then repair the product or products. The cost of parts and labor charge will be estimated by a technician and confirmed by the customer prior to repair.

  • Page 19: Appendix 1: Ypbpr Video Pin-Out For The Hd-20 Camera & Quick-Connect Analog Ypbpr Output

    WallVIEW CCU HD-20 HD-SDI Appendix 1: YPbPr Video Pin-Out for the HD-20 Camera & Quick-Connect Analog YPbPr Output YPbPr Pr GND Y GND Pb GND EZIM HD-SDI Slot card Pin out Assignments (568B Wiring Standard) Power Connector RJ-45 Power Power+ Power- Power+ 12345678...

  • Page 20: Appendix 3: Communication Specification

    TXD (to RXD of control source) No Flow control NOTE: The Vaddio ClearVIEW HD-20 Control Protocol is similar, but not identical to the Sony® VISCA™ command set in order to be compatible with several popular control devices. Not all VISCA commands are supported and there are many HD-20 specific commands in the following Command and Inquiry Lists.
  • Page 21 WallVIEW CCU HD-20 HD-SDI HD-20 Command List (2/2) Command Set Command Command Packet Comments CAM_Backlight 81 01 04 33 02 FF 81 01 04 33 03 FF CAM_Aperture Reset 81 01 04 02 00 FF 81 01 04 02 02 FF Down 81 01 04 02 03 FF Direct...
  • Page 22 WallVIEW CCU HD-20 HD-SDI HD-20 Inquiry List (1/1) Inquiry Command Command Command Packet Comments CAM_PowerInq 81 09 04 00 FF y0 50 02 FF y0 50 03 FF Off(Standby) CAM_ZoomPosInq 81 09 04 47 FF y0 50 0p 0q 0r 0s FF pqr: Zoom Position CAM_WBModeInq 81 09 04 35 FF...
  • Page 23 WallVIEW CCU HD-20 HD-SDI WallVIEW CCU HD-20 HD-SDI Manual 342-0182 Rev. A Page 23 of 24...
  • Page 24 ©2011 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ClearVIEW, ProductionVIEW, Quick-Connect, WallVIEW, EZCamera, HSDS and PowerRite are registered trademarks of Vaddio.