No
Parts
4
Disassemble
the electrical
control box.
(Inverter board)
Samsung Electronics
Procedure
5) Unfasten the two ground bolts.
6) Lift the electrical control box and push it
outward.
1) Disassemble the left-front board.
2) Unfasten the one fixing bolt on the fixing
board below the electrical control box and
the left-rear board.
3) Unfasten the one fixing bolt on the fixing
board below the electrical control box and
the central separation plate.
(Use +Screw Driver)
Disassembly and Reassembly
Remark
3-19