Samsung AVXWVH022EE Installation Manual
Wall-mounted type series
Hide thumbs
Also See for AVXWVH022EE:
- User manual (40 pages) ,
- Service manual (508 pages) ,
- User manual (30 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung AVXWVH022EE
Summary of Contents for Samsung AVXWVH022EE
- Page 1 AVXWV@@_IM_E_29819-1_4.14.09.indd 1 2009-4-14 10:15:27...
-
Page 2: Table Of Contents
AVXWV@@_IM_E_29819-1_4.14.09.indd 2 Contents Safety Precautions Accessories Selecting the Installation Location Fixing the installation plate Purging the Unit EEV Kit Installation Connecting the Refrigerant Pipe ... 13 Cutting/Flaring the Pipes ... 14 Performing Leak Test & Insulation ... -
Page 3: Safety Precautions
Safety Precautions The following safety precautions must be taken when using your air conditioner. WARNING • Risk of electric shock can cause injury or death. • Disconnect all remote electric power supplies before servicing, installing or cleaning. • Installation must be done by the manufacturer or service agent or a similar qualified person in order to avoid a hazard. - Page 4 Safety Precautions (Continued) AVXWV@@_IM_E_29819-1_4.14.09.indd 4 OWER SUPPLY LINE OR CIRCUIT BREAKER If the power cable of this air conditioner is damaged, it must be replaced by service agent or similarly qualified persons in order to avoid a hazard. The unit must be plugged into an independent circuit if applicable or ...
- Page 5 CAUTION Make sure that you earth the cables. - Do not connect the earth wire to the gas pipe, water pipe, lighting rod or telephone wire. If earthing is not complete, electric shock or fire may occur. Install the circuit breaker. ...
-
Page 6: Accessories
Accessories The following accessories are supplied with the indoor unit. The type and quantity may differ depending on the specifications. Installation Plate Remote Control Batteries for Remote Control User’s Manual Installation Manual AVXWV@@_IM_E_29819-1_4.14.09.indd 6 2009-4-14 10:15:28... -
Page 7: Selecting The Installation Location
Selecting the Installation Location Indoor Unit Select a convenient location that permits the air to reach every corner of the area to be cooled. Pre-plan for easy and short routing of the refrigerant tubing and wiring to the outdoor unit. ... -
Page 8: Fixing The Installation Plate
Fixing the Installation Plate Installation plate Pipe hole (Ø65mm) (Unit : mm) 022/028/036 (Unit : mm) 056/071 Purging the Unit AVXWV@@_IM_E_29819-1_4.14.09.indd 8 Before fixing the installation plate to the wall or window frame, you must determine the position of the 65mm hole through which the cable, pipe and hose pass to connect the indoor unit to the outdoor unit. -
Page 9: Eev Kit Installation
EEV Kit Installation Preparing for Installation Check dimension and installation location. Check installation place. By using a pattern sheet, check required installation space. ��� ��� ��� ��� ��� ��� ��� �� ��� Indoor unit pipe connection Required maintenance space �� AVXWV@@_IM_E_29819-1_4.14.09.indd 9 450mm X 200mm or more ... - Page 10 EEV Kit Installation (Continued) Nylon band EEV Kit body AVXWV@@_IM_E_29819-1_4.14.09.indd 10 Connection of refrigerant piping & Insulation Insert bot anchors, use existing ceiling supports or construct a suitable support. CAUTION Ensure the ceiling is strong enough to support the weight of the indoor unit.
- Page 11 Wiring & Assigning address Room A Room B Connect the AC power cable and communication cable from the outdoor unit to terminal, then connect the cable to another EEV kit. Connect the AC power cable and communication cable to each indoor unit (A, B and C).
-
Page 12: Key Function
EEV Kit Installation (Continued) AVXWV@@_IM_E_29819-1_4.14.09.indd 12 Function of Display T he numbers which are displayed on left are the status of indoor unit checking status through communication with same outdoor unit. (If it indicates 1, 3 and 7, that means the ADDRESS of indoor unit is set to 1, 3 and 7.) T he numbers which are displayed on right indicate the ADDRESS of SW01/SW02, ... -
Page 13: Connecting The Refrigerant Pipe
Connecting the Refrigerant Pipe There are 2 refrigerant pipes of different diameters: The smaller one is for the liquid refrigerant The larger one is for the gas refrigerant A short pipe is already fitted to the air conditioner. You may need to extend the pipe using the assembly pipe. -
Page 14: Cutting/Flaring The Pipes
Cutting/Flaring the Pipes AVXWV@@_IM_E_29819-1_4.14.09.indd 14 Make sure that you prepared the required tools. (pipe cutter, reamer, flaring tool and pipe holder) If you want to shorten the pipe, cut it using a pipe cutter ensuring that the cut edge remains at 90° with the side of the pipe. There are some examples of correctly and incorrectly cut edges below. -
Page 15: Performing Leak Test & Insulation
Performing Leak Test & Insulation Insulation AVXWV@@_IM_E_29819-1_4.14.09.indd 15 2009-4-14 10:15:40... - Page 16 Performing Leak Test & Insulation (Continued) Insulation Insulation Liquid pipe Gas pipe 10mm 10mm 10mm Gas pipe Liquid pipe AVXWV@@_IM_E_29819-1_4.14.09.indd 16 8 Select the insulator of the refrigerant pipe. Insulate the gas side and liquid side pipe referring to the thickness according to the pipe size.
-
Page 17: Installing And Connecting The Drain Hose Of The Indoor Unit
Installing and Connecting the Drain Hose of the Indoor Unit When installing the drain hose for the indoor unit, check if condensation draining is adequate. When passing the drain hose through the 65-mm hole drilled in the wall, check the following: The hose must The end of the drain NOT slant upwards. -
Page 18: Wiring Work
Wiring Work Power and communication cable connection Before wiring work, you must turn off all power source. Indoor unit power should be supplied through the breaker(MCCB, ELB) separated by the outdoor power. The power cable should be used only copper wires. Connect the power cable{1(L), 2(N)} among the units within maximum length and communication cable(F1, F2) each. - Page 19 Specification of electronic wire Power supply MCCB Max : 242V X A, 30mmA Min : 198V 0.1 sec Decide the capacity of ELB and MCCB by below formula. The capacity of ELB, MCCB X [A] = 1.25 X 1.1 X ∑ Ai X : The capacity of ELB, MCCB ...
- Page 20 Wiring Work (Continued) AVXWV@@_IM_E_29819-1_4.14.09.indd 20 CAUTION Select the power cable in accordance with relevant local and national regulations. Wire size must comply with local and national code. For the power cable, use the grade of H07RN-F or H05RN-F materials. ...
-
Page 21: Indoor Unit Setting
Indoor Unit Setting Before installing the indoor unit, assign an address to the indoor unit according to the air conditioning system plan. The address of the indoor unit is assigned by adjusting MAIN(SW01, SW02) and RMC(SW03, SW04) rotary switches. SW01 SW03 SW05 SW06... -
Page 22: Additional Functions
Additional Functions �� �� �� �� ���� �� �� �� �� ���� �� ��� ��� ��� ���� AVXWV@@_IM_E_29819-1_4.14.09.indd 22 Function Centralized controller SW05 Function Heating Current Temperature Compensation Filter Time SW06 Function Indoor Expansion Valve For Heating Stop Wired Remocon Group Master SW07 External control Not use... -
Page 23: Final Checks And User Tips
Final Checks and User Tips To complete the installation, perform the following checks and tests to ensure that the air conditioner operates correctly. Check the following: Strength of the installation site Tightness of pipe connection to detect gas leak ... -
Page 24: Troubleshooting
Troubleshooting Detection of errors If an error occurs during the operation, one or more LED flickers and the operation is stopped except the LED. If you re-operate the air conditioner, it operates normally at first, then detect an error again. LED Display on the indoor unit LED Display Abnormal conditions... - Page 25 Abnormal conditions Self-diagnostic error (including the indoor unit not detected) 1. Error of electronic expansion valve close 2. Error of electronic expansion valve open 3. Breakaway of EVA OUT sensor 4. Breakaway of EVA IN sensor 5. Breakaway of COND MID sensor 6.
- Page 26 "EEE Yönetmeliğine Uygundur" "This EEE is compliant with RoHS" AVXC1@@_IM_E_29824-1_5.05.09.indd 30 2009-5-12 8:46:05...
-
Page 27: Air Conditioner
DB98-29819A(1) AVXWV@@_IM_E_29819-1_5.08.09.indd 27 INSTALLATION MANUAL Wall-mounted Type Series Vivace Type : AVXWV Air Conditioner 2009-5-8 16:58:36...