Table of Contents
Advertisement
No
Parts
5
Bell-Mouth
6
Evap. Temperature
Sensor
Samsung Electronics
Procedure
1) Remove the 2 fixed screws and disconnect
the white drainage hose from the Drain
Pump. (Use +Screw Driver)
2) Remove the 2 screws and take the
Drain-Hose out from the indoor unit to
disassemble the transparent Drain-Hose
fixed on the side of the indoor unit.
(Use +Screw Driver)
1) Use your hand to remove the temperature
sensor attached to the Evap Pipe along with
the fixing clip.
Disassembly and Reassembly
Remark
3-5
Hide quick links:
Advertisement
Table of Contents
