2- Manual Overview; 3- Required Items For Installation; 4- Package Contents - Wirepath WPS-300-ENC-4IP Installation And User Manual

WPS-300-ENC-4IP Installation Manual

2- Manual Overview

We recommend that this document is read in its entirety before proceeding with system design, installation, or operation of the WPS-
300-ENC-4IP Encoder. When viewing this document electronically, the content identified within references can be easy located by
clicking on the reference. These references have been formatted as a standard hyperlink so that they can be easily identified with
exception to the TOC which can also be used to link to sections.

3- Required Items for Installation

The following items are required during the installation of a Wirepath™ IP Encoder. It is recommended that these items are prepared
in advance to ensure that the installation can be performed smoothly.

All Encoders to be installed in the system

All Analog Cameras that will be installed in the system

NVR that will be installed in the system (Optional)

Network Connection near the location of the Encoder

Administrator rights to the computer that will be used to access the Encoder(s)

Router / Switch Details – Contact the network admin to obtain
Admin Rights – Required to setup the network and port forwarding for remote access.
o
o
Static IP to assign to the Encoder
o
Default gateway
o
Net Mask Address
o
DNS Address

Installation Manual for all the Wirepath™ Surveillance Encoders being installed

Quick Start Guide and Installation Manual for all the Wirepath™ Surveillance Encoders being installed

Quick Start Guide and Installation Manual for all the Wirepath™ Surveillance Analog Cameras being installed

CD Rom supplied with the Encoder

4- Package Contents

(1) WPS-300-ENC-4IP
(1) 12V DC 1.5A Power Supply
(1) Alarm and Relay Connectors
(1) Quick Start Guide
(1) CD Rom containing documents and setup software
Pg. 6
© 2013 Wirepath™ Surveillance