Table of Contents
Advertisement
12.2- User Management
12.3- System Update
Important Note:
Updating Firmware MUST be performed over a wired IP connection to the device. While it is possible to recover from an
upgrade that fails due to a lost or intermittent connection, the Encoder will be inoperable until it is recovered via a reliable
connection.
www.snapav.com Support: 866.838.5052
There are 2 levels of users: Administrator which is the default Admin account, and Guest accounts. The
Admin account is the only account that can be set as an administrator. An unlimited number of guest
accounts can be added.
Anonymous
When Yes is selected the Encoders can be accessed without the use of login
User Login:
credentials. These users have the ability to:
Recommendation: To avoid unwanted access to the Encoders we recommend
that this feature be set to NO.
Add User:
Usernames can only contain Letters and Numbers. Spaces and special characters
such as underscores will not be accepted.
Note: Only 1 Administrator account can be created.
User List:
User passwords can be changed by selecting Edit. Names cannot be changed. To
change a Username, the account must be deleted and recreated.
Note: The Administrator account cannot be removed.
Recommendation: Before performing a Firmware update, we recommend that the Encoders
configuration be saved to a file in the event that any settings are changed by the upgrade.
Firmware Version
Current firmware version of the Encoders.
New Firmware
Select Browse to open a new firmware file stored on the PC. After selecting the
file, select the Upgrade button to begin the firmware update process. Software
Updates can be downloaded from www.SnapAV.com.
Reboot System
Select the Start button to reboot the Encoders.
Factory Default
Select the Start button to reset the Encoders to factory defaults.
Recommendation: This will erase all Encoder settings with the exception of
network configuration and User accounts. However, as a precaution we
recommend that the settings are saved prior to performing a factory default.
Load Settings File
Allows for a previously saved setting file to be uploaded to the Encoders.
Note: This will overwrite any existing settings once Apply is selected.
Backup Settings
Saves the current settings to a backup file. Select the Download button and
select the desired file path and name.
View Video
Use Zoom, Mute, Video (Full), Record, and Picture
Change the GUI size
WPS-300-ENC-4IP Installation Manual
Pg. 23
Advertisement
Table of Contents
