3-Control Connections - Wirepath WPS-300-ENC-4IP Installation And User Manual

WPS-300-ENC-4IP Installation Manual
6.2.3- Control Connections
1
3 4
Pg. 10
1.
Alarm Connections
2
Connect to motion sensors, or door switches or other devices to trigger an
event for a particular camera.
Configuration is required; see section
Max Voltage: 33v DC 50mA
2.
Relay Connections
Connect to devices to control from the GUI, or when an event occurs.
Configuration is required; see section
3.
RS-485 PTZ Connections
Connect to a PTZ camera to control the PTZ functions. If multiple PTZ are
being used, they can be daisy chained to this connection.
4.
Ground (GND)
Ground connection for Alarm Connections
12.11-I/O Settings.
12.11-I/O Settings.
© 2013 Wirepath™ Surveillance