Table of Contents
Advertisement
12.9- Audio Settings
www.snapav.com Support: 866.838.5052
Video Format
While the default of H.264 is most efficient and will work in most cases; some devices
that access Streaming 1 or Streaming 2 video streams may not support this format.
For example, mobile devices, and automation system GUIs sometimes do not support
H.264. Adjust the format to suit the system requirements and intended use of the
streams.
Available Formats
RTSP Path
Enter the name of RTSP (Real Time Streaming Protocol) path if RTSP has been
configured.
12.8.2- Streaming 3
Video Quality
Changes the video bitrate based on a level from Low (slowest) to Best (fastest)
bitrates.
12.8.3- Streaming 4
3GPP
Enable if mobile 3GPP streaming is desired.
This stream provides a fixed, 176x144 resolution, 5 FPS MPEG4 video stream for use
by mobile devices.
3GPP Path
Enter the name of 3GPP (3rd Generation Partnership Project) path if 3GPP has been
configured.
Use this menu to configure Audio if the Encoder has a microphone installed.
Encoder to PC
When enabled, allows audio from a microphone (ex: WPS-ACC-MIC) installed at the
Encoder to be heard at the PC.
H.264
MJPEG
WPS-300-ENC-4IP Installation Manual
Pg. 29
Advertisement
Table of Contents
