12- Configuration Menu Operation; System Information; 1-Server Information; 2-Time Settings - Wirepath WPS-300-ENC-4IP Installation And User Manual

Table of Contents

Advertisement

WPS-300-ENC-4IP Installation Manual

12- Configuration Menu Operation

12.1- System Information

This menu displays important information about the Encoder's network settings, and allows for setting items such as language, Date,
and Time.
Pg. 22
12.1.1- Server Information
Displays information about the Encoder's MAC Address, allows for entering a name to easily identify the
Encoder, and selecting a language for the GUI.
MAC
Displays the MAC Address of the Encoder. This cannot be adjusted, and will appear
Address
grayed out.
Server Name
Name for the Encoder (limited to 31 characters) that will appear in the IP Installer, and
GUIs.
Language
Select the language to use for the Main Encoder Interface.
12.1.2- Time Settings
Proper time settings are important for producing accurate time stamps for events, recorded video, and
captured snapshots.
Server Time
Displays the Current Time and Date for the Encoders
Date Format
Select the desired format to display the Date.
Time Zone
Time Zone can only be adjusted when NTP, or Manual are selected.
Enable Daylight
When enabled, Daylight Saving Time Start and Stop parameters can be configured.
Savings
By default this is set to On.
Keeps Encoder time synchronized with a Network Time Server.
NTP
Recommendation: We recommend that the default (pool.ntp.org) be used as it pulls
from multiple redundant servers.
Sets the Encoder date and time to that of the local PC, and then shifts to the Encoder's
Synchronize
With PCs Time
internal clock. After applying, Time Setting is indicated as Internal Clock.
Allows for manual entry of the date and time, then shifts to the Encoder's internal clock.
Manual
Internal Clock
Shifts the Encoder to using the Internal Clock only. Automatically selected after using
Synchronize with PC's time or Manual time settings.
12.1.3- OSD Setting
Allows for enabling the Time Stamp feature for captured Snapshots, and streamed and recorded video.
Display
Enables or Disables a date and time stamp in snapshots, and streamed and recorded
video.
© 2013 Wirepath™ Surveillance

Advertisement

Table of Contents
loading

Table of Contents