Table of Contents
Advertisement
WPS-300-ENC-4IP Installation Manual
6- Change the Administrator Password
Now that the Encoder is visible on the network, we recommend that the administrator password is changed from the default
to prevent unwanted access.
See section
A.
Select Config Button in the upper right hand corner of the Main Encoder Interface.
B.
Select User Management in the left side menu.
C. Select Edit next to the admin username in the user list at the bottom of the screen to open the User Setup window.
D. Edit the Username (if desired) and New Password, confirm the new password.
E.
After selecting OK, the user login window will open. Enter the new password to continue.
7- Configure User Accounts to Access the Encoder
There are 2 levels of users, Administrator which is the default admin account, and Guest accounts. The admin account is
the only account that can be set as an administrator. An unlimited number of Guest accounts can be added that can view
and control the function of the Encoder, but will not be able to access or modify any of the Encoders settings.
Access to the Encoder varies based on the level:
Administrator
Guest
Note: Once a username is created it cannot be edited, only the password can be changed. If a username needs
to change, it will need to be removed, and a new name created.
See section
A.
Select Config Button in the upper right hand corner of the Main Encoder Interface.
B.
Select User Management in the left side menu.
C. Enter a Username and Password for a new user.
D. Re-Enter the password in the Confirm field, and select Add to confirm the addition.
8- Set the Video Orientation
By default, the Encoder is configured for mounting on the ceiling, or under and eave (dome facing down). This allows for the
image to be right side up when viewing. Installations where the Encoder is mounted on a shelf or other flat surface (dome
facing up), the video image must be flipped.
See section
A.
Select Config Button in the upper right hand corner of the Main Encoder Interface.
B.
Select Image Setting under A/V Setting on the left side Menu.
C. Select Flip and/or Mirror checkbox next to Video Orientation as required, and then select save.
Pg. 18
12.2-User Management
for details on the features used in this step.
Has access to all functions of the Encoder including configuration.
Has access to view the Encoder, and has limited control for saving recordings, and photos. No configuration
is allowed for the guest level. Guests attempting to access to the Encoder configuration will be prompted for
the Admin username and password.
12.2-User Management
for details on the features used in this step.
12.7-Image Settings
for details on the features used in this step.
© 2013 Wirepath™ Surveillance
Advertisement
Table of Contents
