Introduction; Unpacking - Martin EC Series LED Video Panel Installation And Safety Manual

Introduction

This Installation and Safety Manual explains how to install, configure and maintain Martin™ EC™
Series video display panels. The Safety section contains very important warnings. The installation
section contains details of how to physically install panels and cables, connect panels to power and
prepare for connection to a Martin™ P3-100™ System Controller and video source.
For information about installing and using the P3-100 System Controller, see the P3-100 user
documentation supplied with the P3-100.
All EC Series and P3-100 user documentation is also available for download free of charge from the
Product Support area at www.martin.com
Thank you for selecting a product from the Martin™ EC™ Series of modular LED-based video display
panels from Martin™. This product features:
• 20 mm (0.79 inch) pixel pitch
• Rich RGB color
• 24 x 36 pixels per panel image resolution
• Color resolution of 16 bits per color
• Silent convection cooling
• Cable-free panel interconnection (integral power and P3 data connectors)
• Auto-sensing 200 - 240 VAC nominal switch mode power supply
For the latest firmware updates, documentation, and other information about this and all Martin
Professional™ products, please visit the Martin website at http://www.martin.com
Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to:
Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.
WARNING! Read "Safety Information" on page 3 before installing, powering, operating or servicing
the EC-20.
Like all LED video panels, this is an ITE Class A product. In a domestic environment this product may cause
radio interference, in which case the user may be required to take appropriate measures.

Unpacking

Panels and panel flightcases
The EC-20 panel, calibrated (P/N 90354230) is ordered in multiples as a single item. It is supplied in a
flightcase that has space for up to 8 panels, but note that panels and flightcases must be ordered
separately.
The Flightcase, 8 x EC-20 video panels (P/N 91515008) contains:
• Up to 8 EC-20 panels (must be ordered as separate items)
• EC Series Installation & Safety Guide (P/N 35000238)
No cables are supplied in the flightcase because panels plug into each other, but there is space for storing
cables, curving hardware, etc.
Headers and Header flightcases
The EC Series Single Header in a cardboard box (P/N 90354240) contains:
• 1 x EC Series Header (P/N 90354220) with hard-wired power cable and eyebolt (installed)
• 1 x 5.0 m (16.4 ft.) Ethernet patch cable with IP67-rated RJ-45 connectors on both ends
• 1 x EC Series Header Installation & Safety Guide
The EC Series Double Header (P/N 90354250) is supplied as one assembled unit in a separately ordered
flightcase. It contains:
• 2 x EC Series Headers (P/N 90354220), each with hard-wired power cable and eyebolt (installed)
• 1 x EC Series Header Connection Bracket two panels wide (installed)
• 2 x EC Series Bracket Joining Plate
6 EC-20 user manual