Receiver Drill Measures; The Receiver Shall Be Attached With 4 Mm Screws - Akerstroms SESAM 800 CONFIGURABLE Operating Manual

Receiver Drill Measures

9. Power off the receiver (if you have a conversion box for 230 V AC
wait 10 seconds).
10. Reinstall the Jumper J1 in its delivery setting.
11. Start the receiver.
12 Receiver Drill Measures
Figure 9.
Sesam 800 Configurable
Version: A0
120 mm
102 mm
The receiver shall be attached with 4 mm screws that are
suitable for the surrounding environment
Document-ID: 947422-000
Author: SH
15 (16)