Using The Headset - NEC Univerge SV8100 User Manual

Using the Headset

Your extension is automatically in the Headset Mode when your headset is removed from its base.
There is no need to have a Headset Feature Key or dial Service Code 798 to turn the Headset Mode on
and off.
To place a call when using your headset:
1. Tap your headset Call Control button and dial normally.
2. To hang up, tap your headset Call Control button.
To answer a call when using your headset:
1. When you hear ringing (triple beeps) in your headset, tap your headset Call Control button.
– If your extension has Headset Voice Announce enabled, voice-announced Intercom calls
connect to your headset.
To convert a headset call to a Handsfree call:
1. Press SPEAKER.
2. Tap Call Control.
To convert a headset call to a Handset call:
1. Lift the handset.
2. Tap Call Control.
Other Feature Interactions
– Pressing MUTE while on a call mutes the headset microphone.
– Off-Hook Signalling works normally.
– Paging announcements broadcast through the telephone speaker, not the headset.
– While on a headset call, receive volume control is adjusted locally at the headset only.