Table of Contents
Advertisement
4.6.5.2 Windows Clients
4.6.5.2.1 Install SANit Client on Windows Platform
Step 1: Select the "Computer Management" file in your computer. Select "Device
Management" and then select: Disk drives." Confirm that the device, with installed
driver, appears in the Disk Drive as shown below:
Note
If you cannot see the storages you created in Disk drivers list, it means
you don't install the SANit client software properly.
Step 2: Choose a language, and then follow the steps in the installation procedures as
shown. Continue installation using the FS Client 5.3.3 Setup Wizard by clicking "Next."
User Guide
4. How to Use
Page 4-30
Advertisement
Table of Contents
