Table of Contents
Advertisement
Figure 17: Connecting the PCIe QSFP cable to the storage port (black color)
3. Plug a power cord into the AC power-in port in the storage system; do not turn
power on yet.
Figure 18: Connecting the power cord to the storage (B08S2-PS or A12S2-PS)
Caution
Once powered on, Do
use to avoid data loss and corruption.
3.1.3 Connecting SW16 to the Host systems
1. Insert the end of the QSFP cable into the PCIe port on the HBA card, which you
installed on the host system earlier in Section 3.1.1. The cable connector is securely
plugged when you hear a click.
2.
Insert the other end of the cable into the client port (orange color) on the SW16.
User Guide
remove the QSFP PCIe cable when in
NOT
Figure 19: Connecting the QSFP cable to a host system
3. Installation
Page 3-4
Advertisement
Table of Contents
