Mac Client; Install Sanit Client On Mac Platform - Accusys ExaSAN SW16 User Manual

Step 7: Finally, click the "Computer" icon on your desk top. See client local hard disks
and SAN hard disk storage location and capacity status as shown below:

4.6.5.3 MAC Client

4.6.5.3.1 Install SANit Client on Mac Platform

Add each client IP to join the SAN group. Before you add a client IP, ensure that your IP
(example: 192.168.0.233) can "Ping" to the SW16 IP(example: 192.168.0.25). See the
steps below:
Step 1: After you download the SANit Mac client software, please follow the installation
procedures as follows:
Note:
In SANit version 5.3.3, you may not find the MAC client software in the
"Download Client Software and Document." Future version may
support Mac client software. Please contact your SANit supplier or visit
the Accusys web site http://www.accusys.com.tw to learn more.
Step 2: Double click "SANit Mac client software" to install it and then click "Continue."
User Guide
4. How to Use
Page 4-36