Install And Configure Sanit Linux Client Software - Accusys ExaSAN SW16 User Manual

4.6.5.4.1 Install and Configure SANit Linux Client Software

Step 1: Install the SANit Linux client. Type "./client_installer.sh install" on command.
Step 2: Mount the SANit volume,type "mount –t enfs –o _netdev
<MDC_IP_ADDRESS>:/fsmnt/<SANit file system name> /mnt/"
Note:
Please enter the SANit configuration menu and go to "System Status". You can
find "Mount point" (See below). For example, if you find the mount point is
/fsmnt/SANit，you can type the following command:
mount –t enfs –o _netdev 192.168.0.25:/fsmnt/ExaSAN /mnt
User Guide
4. How to Use
Page 4-46