Beeper Codes - Accusys ExaSAN SW16 User Manual

4 Link LED

1.4.1.2 Beeper Codes

Controller Status
Turn on the switch (SW16)
System kernel Panic
Fan Failure
Fan speed is under 5500RPM
Power Failure
Temperature Failure
Note
Three short beeps indicate multiple possible faults, please check the
switch web GUI to isolate the fault condition.
User Guide
No Light indicates the LED failed or
power off
Indicates the controller status
• Flashing Blue indicates the
controller is booting for link
• Solid Blue indicates the
Blue
controller is ready for link to a
client.
• No light indicates the controller
is inactive.
Beeper mode
One short beep
Continuous beeping
Three short beeps (Repeating)
Three short beeps (Repeating)
Three short beeps (Repeating)
Three short beeps (Repeating)
1. Introduction
Page 1-10