Air Filter Housing Drains; Draining V-Belt Cover; Tires - Arctic Cat TRV 2015 Operator's Manual

5. Fill a wash pan larger than the ele-
ment with a non-flammable cleaning
solvent; then dip the element in the
solvent and wash it.
 NOTE: Foam Air Filter Cleaner
and Foam Air Filter Oil are avail-
able from Arctic Cat.
6. Squeeze the element by pressing it
between the palms of both hands to
remove excess solvent. Do not twist
or wring the element or it will
develop cracks.
7. Dry the element.
8. Put the element in a plastic bag; then
pour in air filter oil and work the oil
into the element.
9. Squeeze the element to remove
excess oil; then install in the frame.
CAUTION
A torn air filter can cause damage to the
engine. Dirt and dust may get inside the
engine if the element is torn. Carefully
examine the element for tears before
and after cleaning it. Replace the ele-
ment with a new one if it is torn.
10. Clean any dirt or debris from inside
the air filter housing.
11. Place the filter in the air filter hous-
ing making sure it is properly in
position and seated; then install the
cover and secure with the fasteners.
Air Filter Housing
Drains
Inspect the drain beneath the main hous-
ing for debris and for proper sealing.
72
1000
GZ019

Draining V-Belt Cover

 NOTE: If the ATV has been driven
through water, the V-belt cover
must be drained of any water.
1. Place the ATV on a level surface.
2. Remove the drain bolt from the cover
and allow the water to drain out.
3. Shift the range lever to the neutral
position; then start the engine.
4. Increase and decrease engine RPM
several times to "blow out" any
water; then stop the engine.
5. Install the drain bolt and tighten
securely.
 NOTE: The V-belt and clutches
should be inspected every 500
miles and the belt replaced (if nec-
essary).

Tires

Always use the size and type of tires
as specified. Refer to the specifica-
tions chart for proper tire inflation
pressure, and always maintain proper
tire inflation pressure.
! WARNING
FI704A
CF110A