Toshiba RAV-SM560AT-E Service Manual page 136

Toshiban lämmitys- ja jäähdytyslaitteiden jälleenmyyjä pääkaupunkiseudulla on Jäähdytinpalvelu RefGroup Oy
No. Part name
S
1. Detachment
Adjust corner
cap
2. Attachment
T
Ceiling panel 1. Detachment
NOTE :
Remove the connector by releasing
locking of the housing.
2. Attachment
NOTE :
A panel has directional property, so mount
a panel with attention to the marks.
Procedure
1) Perform work of item 1. of
2) Remove screws at 4 corners of the
suction port. (Ø4 x 10, 4 pcs.)
3) Push the knob outward and remove the
adjust corner cap by sliding it.
1) Mount the adjust corner cap by sliding
it inward.
2) Tighten screws at 4 corners of the
suction port. (Ø4 x 10, 4 pcs.)
1) Perform works of items 1 of
S
and 1 of .
2) Remove the flap connector (CN33,
White, 5P) connected to the control P .C.
board, and then remove the lead wire
from the clamp.
3) Remove screws fixing the ceiling panel.
(M5, 4 pcs.)
4) Push the tentative hook outward to
remove the ceiling panel.
1) Hang the tentative hook of the main
body drain pan to the tentative hook of
the ceiling panel.
2) Tighten fixing screws. (M5, 4 pcs.)
3) Connect flap connector of the ceiling
panel to connector (CN33, White, 5P)
on the control P .C. board.
www.ilmalämpöpumput.com
Q
.
Q R
, 1 of
Remove the flap
connector
– 136 –
Remarks
Screw
Push outward
Fixing screw
Push the tentative
hook outward