Digital Watchdog VMAXD1 16 User Manual page 35

Error Alarm Action
Select how you wish to be notified of any alarm errors (Video Loss Signal, HDD Full, Fan Failed, HDD Failure, and Storage Warning).
Go to [Setup] > [System].
On the Error Alarm Action selection widow, select how to be notified of the alarm. Select from Off Buzzer, E-mail, Relay01, and
Popup Window.
Error Alarm Duration
Set the duration of the alarm triggered by a system error.
Go to [Setup] > [System].
In the Error Alarm Duration selection window, set Alarm Duration by using the arrow keys and the SELECT button.
Select from Latch, 5 SEC, 10 SEC, and Custom (5-60).
Auto Log Off
This is used to set a time for when the DVR automatically exits the Setup Menu and displays the real-time monitoring screen due to
inactivity.
Go to [Setup] > [System].
In the Auto Log Off selection window, select the time you wish to set, using the arrow keys and the SELECT button.
Auto Log Off is not used.
Off
If there is no input from the front button, remote controller, or mouse, the system will shift to the real-time
1/2/3 MIN
monitoring mode after 1, 2, or 3 minute(s).
The user can enter the time directly.
Custom
Selecting the Custom causes the Input window to appear.
Enter the time by using the numeric buttons or the arrow keys and the SELECT button.
Language
Select the language for the VMAXD1 OSD Menu. 17 languages are supported.
T
he user can exit the menu by pressing the [ESC] button in the System menu.
The time can be set to 1-60 minute(s).
Warning Window (Popup)
If Popup is selected, this Warning window will appear on the real-time
monitoring screen. It will indicate Video Loss, HDD Full, Fan Failed,
Storage Failure, and Storage Warning in white.
35