Digital Watchdog VMAXD1 16 User Manual page 2

PRECAUTIONS
Warning
Unauthorized reproduction of all or part of this manual is strictly prohibited.
The FIGURES in this manual are only for illustration purposes. They may differ from the actual product.
The specifications and design of the product are subject to change without prior notice for purposes of quality
improvement.
Cautions
To get the best use out of the product, be sure to read the cautions before using the product.
For safety, please take note of the following:
Instructions Before Using the Product
To prevent electric shock when installing, moving, or opening the DVR and peripheral devices, connect and disconnect the cables as
instructed. All cables must be connected to grounded power outlets.
If the product is installed near a power outlet, make sure it can easily be unplugged.
Do not use the DVR in water or in wet places.
Keep the plastic packing materials used for the DVR or other peripheral devices out of reach of children (may cause suffocation).
Installation Environment of the DVR
Maintain the following conditions: operating temperature of 5˚C ~ 40˚C, operating humidity of 10% ~ 80%.
Install the DVR in a safe place that is free from external vibration.
Install the DVR in a well-ventilated place.
To protect the hard disk from data loss and breakdown, install the DVR away from magnetic materials.
When using a rack other than the standard one, use a separate table with sufficient spacing, i.e., 60cm from the floor, 50cm from the
ceiling, and 20cm from the side and back walls and other objects.
Safety Notes on the DVR
When installing additional boards and HDD, separate the power cable and completely turn off the power supplied to the DVR.
Keep the product away from heat-generating devices, such as heaters.
Do not use a damaged power cord.
To prevent problems due to magnetic interference and electric surge, use only grounded cables and power outlets.
If the power cord is connected, do not touch the power unit. If the power cord is connected, electric current is still flowing internally even
after the switch is turned OFF.
Do not place a heavy object on top of the product.
Do not drop a conductive object in the ventilation holes.
Allot sufficient space for system cabling.
Use only the parts indicated in the manual. Do not disassemble, repair, or modify the product without permission.
Incorrect system setup may cause malfunction.
Shut down the system normally as instructed in the manual.
Safety Notes on the Lithium Battery
Replace lithium batteries as instructed to avoid danger.
Dispose used lithium batteries properly.
Possible Injury or Product Damage
Risk of Minor Injury or Product Damage
Cautions for the Usage of the Product
Information for the Usage of the Product
Warning and Caution are indicated as follows.
2