Digital Watchdog VMAXD1 16 User Manual page 18

Motion
Select the Motion tab to configure the motion detection settings.
Select Motion Area of each channel.
When clicked, the single channel mode composed of square boxes appears on the screen. Use the mouse to select areas you wish
to disable motion detection. Areas where motion detection is disabled will be indicated in the color brown.
Select Motion Area of each channel.
When clicked, the single channel mode composed of square boxes appears on the screen. Use the mouse to select areas you wish
to disable motion detection. Areas where motion detection is disabled will be indicated in the color brown.
Once motion area has been set, set the Motion Sensitivity, Sensor Type, and/or Sound Sensitivity.
18